PIPENET – Cooling Water Systems: Design & Optimisation. Free Training Webinar
26 August – 02 September 2025
We are pleased to invite you to PIPENET – Cooling Water Systems: Design & Optimisation. Free online training webinar
26 August – 02 September 2025
We are pleased to invite you to a free training webinar on PIPENET – Cooling Water Systems: Design & Optimisation. We will take you through the steps of designing your cooling water system in steady state using PIPENET Standard module, then transferring your model to the PIPENET Transient module and optimising your design by analysing various transient events. PIPENET Transient will help you to pinpoint potential problematic areas and suggest ways of mitigating the problems.
Whether you are a new or experienced user of PIPENET, the webinar will give you a good opportunity to develop and upgrade your knowledge and skills in PIPENET Standard and Transient modules.
The training webinar will be held on different days in various time zones for your convenience. Duration – about 2 hours.
Kindly register with your official (company) email address. Registrations with private email addresses may not be approved.
We look forward to seeing you online soon!
PIPENET – Cooling Water Systems: Design & Optimisation
Part 1 – Standard Module
- Pipe sizing and pump selection of a closed loop system – how to optimize?
- Reliability study of an open loop system with variable speed pumps
- Control system design using the Standard module
- Optimal design of a very large cooling water system
Part 2 – Standard Module to Transient Module
- Converting a Standard module file to a Transient module file
- What are some differences between the Standard and Transient modules?
- What are the points in the Transient module the user should be aware of?
Part 3 – Transient Module
- Stability of a control system in cooling water systems and tuning controllers
- Pump failure studies and when this is important
- Cavitation and how to eliminate it
- Scenario Manager